Views:25 Author:Site Editor Publish Time: 2013-02-28 Origin:Site
With the increase of the clinical use of blood components, blood separation has become a necessity, the blood collection agencies will whole blood preparation into various blood components mainly adopts the method of high speed centrifugation, by centrifugal blood when the blood bag breakage phenomena have occurred, the precious blood resources to waste, in order to effectively reduce the blood discarding rate, reduce blood loss, blood bank will choose special centrifuge special attention.
The special centrifuge L6-6KR for large volume blood bank can stand the test of practice. The process of using the blood bank L6-6KR blood bank for the blood bank special centrifuge is introduced below. There is a picture of the truth.
1. A number of blood bags
2, a large capacity blood bank special centrifuge L6-6KR a centrifugal hanging cup is round, the blood level of 6 * 1000/ml special rotor, a separable 400ml Wulian blood bag 6;
The first step: visual inspection of the whole blood of each bag to ensure no leakage and perfect heat.
The second step: weight and balance the blood bag.
The third step: blood into the centrifugal hanging cup, loading the catheter wound and plugged in the wall, trim after hanging on centrifugal support symmetry.
The fourth step: the parameter setting of the centrifuge: the temperature is 4 C, the speed is 3500r/min, and the time is 10min.
Fifth step: after the centrifuge is finished, take out into the receiving basket, wait for separation.
The sixth step: the whole blood bag after centrifugation is put on the pressure board gently, move out of the upper plasma to a transfer bag, and add Red Cell Storaging Solution to make red blood cell products.
The whole process is easy to operate, the blood bag after the centrifuge is clear, the whole blood bag is complete in the whole process, and the effect of the centrifuge is clear at a glance. Good thingto see is really easy to see, so we can pround to recommend to you. ~~~